CNC - 3040 - Back Lit Sign
282 بار بازدید -
7 سال پیش
-
This was a fun project
This was a fun project using some plexiglass from Lowes, scrap wood, some red LEDs, and a 3040 CNC. Back lit signs can also be done by hand with nothing more than a rotary tool and some patience. As long as the plexiglass is etched it will stand out when lit from the side. To generate the g-code for this sign I used a very old version of Illustrator and then a free program called Jscut at www.jscut.org. Thanks very much for taking a look.
7 سال پیش
در تاریخ 1396/02/04 منتشر شده
است.
282
بـار بازدید شده