Smart RAMPS - Optical EndStop
1.6 هزار بار بازدید -
6 سال پیش
-
This will explains the basic
This will explains the basic process of using a optical endstop on Smart RAMPS with Arduino Due.
Required Hardware:
Arduino Due with USB cable
Smart RAMPS
Optical Endstop with cable
Required Software:
Arduino studios 1.8.5 or higher
https://www.arduino.cc/
Pronterface.exe
http://www.pronterface.com/
MarlinFW (Firmware)
http://marlinfw.org/meta/download/
Required Hardware:
Arduino Due with USB cable
Smart RAMPS
Optical Endstop with cable
Required Software:
Arduino studios 1.8.5 or higher
https://www.arduino.cc/
Pronterface.exe
http://www.pronterface.com/
MarlinFW (Firmware)
http://marlinfw.org/meta/download/
6 سال پیش
در تاریخ 1397/06/17 منتشر شده
است.
1,645
بـار بازدید شده