OPTIMUM MB4 | is this chinese milling machine any good?
After dropping a used Wemas WM3 with 1,4tons from ~1m height, i decided my next milling machine will be two magnitudes smaller, so i can handle it myself. After a bit of reading, i decided on the brand Optimum, since they should be the least crappy vendor from asia. Overall i am pretty pleased with the machine, the quality seems ok for the price, only the column is unfortunately out of square by quite a bit. So i will probaly shim it.
Link to Stefan Gotteswinter's video: Optimum MB4 milling machine - Optimum... if you want to support the channel, you can buy me a coffe:
https://ko-fi.com/christophlehner
Thank you very much !!!
*affiliate links:
my camera: https://amzn.to/3Ef7ObP
my lens: https://amzn.to/3fG1sYY
my mic: https://amzn.to/3rtPSTi
or you can also support me through paypal:
Paypal Me: https://paypal.me/clehn8ok
Link to Stefan Gotteswinter's video: Optimum MB4 milling machine - Optimum... if you want to support the channel, you can buy me a coffe:
https://ko-fi.com/christophlehner
Thank you very much !!!
*affiliate links:
my camera: https://amzn.to/3Ef7ObP
my lens: https://amzn.to/3fG1sYY
my mic: https://amzn.to/3rtPSTi
or you can also support me through paypal:
Paypal Me: https://paypal.me/clehn8ok
همه توضیحات ...