How to Setup a Raspberry Pi Pico and Code with Thonny

Let's get set up with coding/scripting in Thonny for the Raspberry Pi Pico. We'll install Thonny, configure for Pico and write our first MicroPython script. To follow along you'll need:

- A Raspberry Pi Pico
- A USB micro B lead
- PC/Mac/Linux/Raspberry Pi (computer) with Internet

The full guide: https://core-electronics.com.au/tutor...

If you have any questions about this content or want to share a project you're working on head over to our maker forum http://coreelec.io/forum

Core Electronics is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for gear from:

• Raspberry Pi Pico https://core-electronics.com.au/catal...
• Raspberry Pi https://core-electronics.com.au/raspb...
• Arduino https://core-electronics.com.au/ardui...
• Sparkfun https://core-electronics.com.au/brand...
• Adafruit https://core-electronics.com.au/brand...
• Pololu https://core-electronics.com.au/brand...
• DFRobot https://core-electronics.com.au/brand...

• #education
• #how_to_setup_raspberry_pi_pico
• #how_to_setup_raspberry_pi_pico_with_thonny
• #how_to_use_thonny_with_raspberry_pi_pico
• #raspberry_pi_pico_thonny
• #thonny_pico
• #raspberry_pi_pico
• #thonny
• #how_to_code_raspberry_pi_pico
• #how_to_load_script_onto_raspberry_pi_pico