Hemera to Ender 3 - Complete guide
The Hemera (formerly Hermes) is a new all in one extruder/stepper/hot end by E3d. I have had a lot of requests to make an install video for an Ender 3, so I present this complete guide.
There are many steps and I’m not sure it’s worth it on a smaller printer like this. Although the initial performance tests are good, I’m going to move these parts to something like the CR-10 Max. The Hemera in isolation is a beautifully engineered piece of kit and will thrive on a printer designed for it from the ground up.
More info on the engineering: https://e3d-online.com/blog/2019/11/2...
Thanks to all of those in the community who have designed parts for this kit.
Purchase the Hemera (please check voltage and filament diameter options):
E3D: https://e3d-online.com/e3d-hemera-175...
Amazon: https://amzn.to/2tGiyh8
Tiny Machines: http://bit.ly/39kSRCC
Phaser FPV (Aus): https://www.phaserfpv.com.au/collecti...
Brian Vanderbusch’s Github gist with tips for this install: https://gist.github.com/LongLiveCHIEF...
1:11 Overview of Hemera
2:49 Step 1: Assemble Hemera off printer
E3D guide for this: https://e3d-online.dozuki.com/Guide/0...
4:28 Step 2: Select and print mounting adaptor parts - these are the parts I selected for this video:
Remixed Hemera adaptor by Menissalt (parts A and B, also for BLtouch mount if needed): https://www.thingiverse.com/thing:406...
5015 blower fan duct by Hangtight (duct mount plate and duct parts): https://www.thingiverse.com/thing:404...
E3D hemera Mount and cooler by Tragical (4010 to 5015 adaptor part for stock parting cooling fan): https://www.thingiverse.com/thing:406...
Other parts not used:
E3D Hemera Thingiverse adaptor (A and B parts too thin, 4010 fan duct too low): https://www.thingiverse.com/thing:400...
Hemera mount to suit BLtouch and EZABL by Joe Casha (easy to fit, simple design but I found this wobbly): https://www.myminifactory.com/object/...
6:32 Step 3: Hemera physical install (to Ender 3/CR-10)
E3D guide that covers most but not all of this: https://e3d-online.dozuki.com/Guide/H...
10:06 Step 4: Wiring
Wires to remove diagram: https://imgur.com/a/EhaTAGP
Hemera wires to connect diagram: https://imgur.com/a/zfvyBsA
13:15 Step 5: Firmware
Ender 3 Bootloader video: Ender 3: How to install a bootloader ...
Ender 3 vanilla Marlin video: Ender 3 vanilla Marlin update: Concis...
Marlin firmware download: https://github.com/MarlinFirmware/Marlin
15:17 Step 6: Calibration
Pronterface download: https://www.pronterface.com/index.htm...
Set e-steps reference: http://marlinfw.org/docs/gcode/M092.html
Set home offset reference: http://marlinfw.org/docs/gcode/M206.html
PID autotune reference: http://marlinfw.org/docs/gcode/M303.html
More detailed video on PID autotune: Two easy fixes for 3D printer tempera...
E3D VREF setting: https://e3d-online.dozuki.com/Guide/0...
More detailed video on setting VREF for the Ender 3: TMC2100 guide - Stepper driver upgrad...
More detailed video on E-steps calibration: How to tune your slicer settings feat...
20:15 Test prints
20mm calibration cube: https://www.thingiverse.com/thing:214260
Low poly fox: https://www.thingiverse.com/thing:937...
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: Patreon: teachingtech
There are many steps and I’m not sure it’s worth it on a smaller printer like this. Although the initial performance tests are good, I’m going to move these parts to something like the CR-10 Max. The Hemera in isolation is a beautifully engineered piece of kit and will thrive on a printer designed for it from the ground up.
More info on the engineering: https://e3d-online.com/blog/2019/11/2...
Thanks to all of those in the community who have designed parts for this kit.
Purchase the Hemera (please check voltage and filament diameter options):
E3D: https://e3d-online.com/e3d-hemera-175...
Amazon: https://amzn.to/2tGiyh8
Tiny Machines: http://bit.ly/39kSRCC
Phaser FPV (Aus): https://www.phaserfpv.com.au/collecti...
Brian Vanderbusch’s Github gist with tips for this install: https://gist.github.com/LongLiveCHIEF...
1:11 Overview of Hemera
2:49 Step 1: Assemble Hemera off printer
E3D guide for this: https://e3d-online.dozuki.com/Guide/0...
4:28 Step 2: Select and print mounting adaptor parts - these are the parts I selected for this video:
Remixed Hemera adaptor by Menissalt (parts A and B, also for BLtouch mount if needed): https://www.thingiverse.com/thing:406...
5015 blower fan duct by Hangtight (duct mount plate and duct parts): https://www.thingiverse.com/thing:404...
E3D hemera Mount and cooler by Tragical (4010 to 5015 adaptor part for stock parting cooling fan): https://www.thingiverse.com/thing:406...
Other parts not used:
E3D Hemera Thingiverse adaptor (A and B parts too thin, 4010 fan duct too low): https://www.thingiverse.com/thing:400...
Hemera mount to suit BLtouch and EZABL by Joe Casha (easy to fit, simple design but I found this wobbly): https://www.myminifactory.com/object/...
6:32 Step 3: Hemera physical install (to Ender 3/CR-10)
E3D guide that covers most but not all of this: https://e3d-online.dozuki.com/Guide/H...
10:06 Step 4: Wiring
Wires to remove diagram: https://imgur.com/a/EhaTAGP
Hemera wires to connect diagram: https://imgur.com/a/zfvyBsA
13:15 Step 5: Firmware
Ender 3 Bootloader video: Ender 3: How to install a bootloader ...
Ender 3 vanilla Marlin video: Ender 3 vanilla Marlin update: Concis...
Marlin firmware download: https://github.com/MarlinFirmware/Marlin
15:17 Step 6: Calibration
Pronterface download: https://www.pronterface.com/index.htm...
Set e-steps reference: http://marlinfw.org/docs/gcode/M092.html
Set home offset reference: http://marlinfw.org/docs/gcode/M206.html
PID autotune reference: http://marlinfw.org/docs/gcode/M303.html
More detailed video on PID autotune: Two easy fixes for 3D printer tempera...
E3D VREF setting: https://e3d-online.dozuki.com/Guide/0...
More detailed video on setting VREF for the Ender 3: TMC2100 guide - Stepper driver upgrad...
More detailed video on E-steps calibration: How to tune your slicer settings feat...
20:15 Test prints
20mm calibration cube: https://www.thingiverse.com/thing:214260
Low poly fox: https://www.thingiverse.com/thing:937...
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: Patreon: teachingtech
همه توضیحات ...