Restoration Curved Dagger of ARTILLERYMAN - MODEL of 1907
Hi! Today, the restoration of the curved dagger of the Bebut artillerymans. Sample of 1907. This dagger was produced in 1915, at the Zlatoust arms factory. The condition of the dagger is bad. There are no accessories for the handle and scabbard. Also, the length of the blade is missing about ~ 5-8 cm. Well, let's start the restore.
The first step is the disassembly of the dagger. Next, clean the blade from rust with a tool. After inspection of the surface of the blade, I found that it was badly corroded. It was decided to lightly sand the blade with sandpaper.
The stamps on the blade have been preserved and they are readable.
The wood scabbard of Bebut dagger turned out to be shortened, like the blade itself. They were covered with modern leather and modern glue. I completely cleaned the scabbard, sanded it further, primed it, sanded it, and so I came step by step closer to the fact that they became strong.
I made new fittings and pins for the dagger handle. In the same way, I made new fittings for the scabbard out of brass. As usual, I made a test for you. Please don't forget to share this video.
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: Patreon: Screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: Facebook: scresandtools
Instagram: Instagram: screwsandtools
#screwsandtools #dagger #restoration
The first step is the disassembly of the dagger. Next, clean the blade from rust with a tool. After inspection of the surface of the blade, I found that it was badly corroded. It was decided to lightly sand the blade with sandpaper.
The stamps on the blade have been preserved and they are readable.
The wood scabbard of Bebut dagger turned out to be shortened, like the blade itself. They were covered with modern leather and modern glue. I completely cleaned the scabbard, sanded it further, primed it, sanded it, and so I came step by step closer to the fact that they became strong.
I made new fittings and pins for the dagger handle. In the same way, I made new fittings for the scabbard out of brass. As usual, I made a test for you. Please don't forget to share this video.
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: Patreon: Screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: Facebook: scresandtools
Instagram: Instagram: screwsandtools
#screwsandtools #dagger #restoration
همه توضیحات ...