Milling Machine Restoration || INHERITANCE MACHINING
0 بار بازدید -
3 سال پیش
-
Join me in my machine
Join me in my machine shop for the Bridgeport restoration. Ok so it's not technically a Bridgeport mill, but it is a vertical milling machine based on the Bridgeport design. Nevertheless, this is a used milling machine and is long overdue for a serious cleaning and adjustment before I can make any chips. First step of this mill restoration was to get everything to a clean slate by doing a thorough machine rust removal as well as scraping away all the sludge embedded with metal chips. With all of the mill ways clean I could then perform both the mill gib adjustment as well as reduce the backlash in the lead screw mechanism. After everything was running smoothly I did the final step of mill tramming where I square the mill spindle to the table using a dial test indicator. And since I intend to use a precision milling vise on my first few projects I went ahead and mounted and squared one up to the table as well.
#inheritancemachining #machineshop #hobbymachininst
Patreon (Early Access + Ad Free + Drawings) - https://www.patreon.com/inheritancemachining
Drawings Store - https://inheritancemachining.com/?product_tag=drawings
Instagram - https://www.instagram.com/inheritancemachining/
Website - https://inheritancemachining.com/
Amazon Storefront (affiliate links): https://www.amazon.com/shop/inheritancemachining
TIMESTAMPS
https://www.seevid.ir/fa/w/wiz0ID4OjV0 Intro
https://www.seevid.ir/fa/w/wiz0ID4OjV0 From the Top Down
https://www.seevid.ir/fa/w/wiz0ID4OjV0 The Mill Head
https://www.seevid.ir/fa/w/wiz0ID4OjV0 Setup Axes
https://www.seevid.ir/fa/w/wiz0ID4OjV0 Cutting Axes
https://www.seevid.ir/fa/w/wiz0ID4OjV0 Way Adjustment
https://www.seevid.ir/fa/w/wiz0ID4OjV0 Hand Wheels, Lead Screws, and DRO
https://www.seevid.ir/fa/w/wiz0ID4OjV0 Lubrication
https://www.seevid.ir/fa/w/wiz0ID4OjV0 Tramming The Head
https://www.seevid.ir/fa/w/wiz0ID4OjV0 Machining Magic
FAQ
Drafting Equipment (affiliate links): https://amzn.to/3P0HvMe
A/V Equipment (affiliate links): https://amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
https://www.epidemicsound.com/track/SQxEhTVi9I/\
https://www.seevid.ir/fa/w/wiz0ID4OjV0
© 2022 Inheritance Machining, LLC. All Rights Reserved.
3 سال پیش
در تاریخ 1400/11/15 منتشر شده
است.
0
بـار بازدید شده