Dovetail Router Bits on the CNC | ToolsToday
25.3 هزار بار بازدید -
6 سال پیش
-
Noah from Elevated Woodworking increases
Noah from Elevated Woodworking increases workshop production by using Amana Tool® Dovetail Router Bits on his CNC machine. http://www.toolstoday.com
While suitable for CNC use, this 14° dovetail bit is also commonly used with half-blind dovetail jigs, as well as with Omnijig, Incra™ and Leigh jigs. Watch as Noah creates this dresser from cherry, using the 14° x 1/2” diameter x 1/4” shank carbide tipped router bit.
Feed, Speed & Step Down Technical Information:
14° Dovetail Carbide Tipped Router Bit No. 45804
http://tinyurl.com/ama45804
Feed Rate (IPM): 100"
Speed (RPM): 18,000
Chip Load (Per Tooth): 0.003"
Ramp Down (IPM Per Pass): 50"
Thank you for watching our video Using Dovetails on the CNC by Noah Lorang and ToolsToday, Your Source for Industrial Cutting Tools.
** Subscribe - toolstoday
** Shop the website - http://www.toolstoday.com
** Like at Facebook - http://tinyurl.com/toolstoday-facebook
** Follow on Instagram - Instagram: toolstoday
See More From Noah
Website https://elevatedwoodworking.com
Autodesk® Fusion 360™ https://www.autodesk.com/products/fus...
JointCAM http://g-forcecnc.com/jointcam.html
While suitable for CNC use, this 14° dovetail bit is also commonly used with half-blind dovetail jigs, as well as with Omnijig, Incra™ and Leigh jigs. Watch as Noah creates this dresser from cherry, using the 14° x 1/2” diameter x 1/4” shank carbide tipped router bit.
Feed, Speed & Step Down Technical Information:
14° Dovetail Carbide Tipped Router Bit No. 45804
http://tinyurl.com/ama45804
Feed Rate (IPM): 100"
Speed (RPM): 18,000
Chip Load (Per Tooth): 0.003"
Ramp Down (IPM Per Pass): 50"
Thank you for watching our video Using Dovetails on the CNC by Noah Lorang and ToolsToday, Your Source for Industrial Cutting Tools.
** Subscribe - toolstoday
** Shop the website - http://www.toolstoday.com
** Like at Facebook - http://tinyurl.com/toolstoday-facebook
** Follow on Instagram - Instagram: toolstoday
See More From Noah
Website https://elevatedwoodworking.com
Autodesk® Fusion 360™ https://www.autodesk.com/products/fus...
JointCAM http://g-forcecnc.com/jointcam.html
6 سال پیش
در تاریخ 1397/09/28 منتشر شده
است.
25,309
بـار بازدید شده